HAND TOOL 4

Product Details:

• Surface scale is 360°; minimum is 2°. It can be set by right or left.• Flexible hose can be used in curve space, all length is 418mm. It has a powerful magnet in front and easy to fix on every position.• Operated by 1/2" wrench will be more convenient owing to appropriate distance between axle center and scale plate.

• To take and plug-on of the ignition coil off with power-output stage at VW, AUDI fuel injection engines.• The front hook removes ignition coil off well from damage itself.• Applicable: VW 8-and 12 cylinder engines e.g. Phaeton, B5 1.8T, GTI. FSI 2.0.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• Easily operates on most 12V and 24V diesel engines 
   and 12V petrol engines.
• Excellent performance at all speeds through maximum 8000RPM petrol 
   or 2000RPM diesel.
• Bright bulb provides concentrated light for high visibility of timing mark.
• LED diagnostic indicator shows accurate engine RPM, Dwell Angle,
   Volt and Advance Degree.
• Detachable clamp-on inductive pick-up testing cable and diesel
  sensor for easy and safe use.
• Replaceable xenon flash tube.

Product Details:

Product Code: YT-0593

Brand : yato

The protractor is used to tighten the heads with a specified angle (final tightening of bolts and nuts with a specified tension by measuring the angle of rotation).

 - works with the key 1/2

 - easy and simple to use

 - angle scale every 2 degrees

 - encased in a plastic cover

 - knob made of chrome-vanadium steel

 - scale 0 - 360 degrees

 

 How to use

 

After tightening the nut with the specified torque using a torque wrench, tighten the nut or bolt to the angle specified on the dial.

Product Details:

Item

Model

 Length

2535 

F1NG

560mm 

2536

F1VG 

580mm

2537

F130

900mm

2538

F125

750mm

2539

F120

600mm

2540

F115

450mm

2541

F12W

240mm

Product Details:

Item

Model

 Length

2535 

F1NG

560mm 

2536

F1VG 

580mm

2537

F130

900mm

2538

F125

750mm

2539

F120

600mm

2540

F115

450mm

2541

F12W

240mm

Product Details:

Item

Model

Width

 Length

2542 

21LV

125mm

255mm

2543 

21TV

137mm 

255mm

2544

2125

92mm

110mm

2545

2155

70mm

110mm

2546

21V5

48mm

110mm

2547

215J

70mm

110mm

2548

21VJ

48mm

110mm

• Made from CR-MO to provide a high strength level and uniform hardness.
• Handle material made from PP+TPR for good grip.

Additional Information:

• Minimum Order Quantity: 1 Piece

• Contents: JTC-3922, JTC-3923, JTC-3429, JTC-3430, Portable tool box.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• 34pc. Tap and Die: 
   m3x0.5,m3x0.6,m4x0.7,m4x0.75,m5x0.8, 
   m5x0.9,m6x0.75,m6x1.0,m7x0.75,m7x1.0, 
   m8x1.0,m8x1.25,m10x1.25,m10x1.5,m12x1.25, 
   m12x1.5,1/8NPT27
• Material: Alloy Steel 
• 1pc. Tap Wrench(m3-m12)
• 1pc. "T" Type Tap Wrench
• 1pc.Die Stock 25mm
• 1pc.Screw Driver
• 1pc.Screw Pitch Gauge

Product Details:

• Work in hard to reach areas.• Faster inserting and removing.• Full depth engagement .• Material:S2• Contents:1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm.• Special offer for CR-V material – JTC-3508A

Product Details:

• Work in hard to reach areas.• Faster inserting and removing.• Full depth engagement.• Material:S2• Contents:1/16" 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"

• OAL:5 meters / 16 feet.• Width:19mm• Soft rubber coated for easy to grasp.

Additional Information:

• Minimum Order Quantity: 1 Piece

 

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• Backlit display: 4 lines 16 characters.
• LCD with adjustable brightness.
• Thermal printer built inside.
• Printing paper width:50mm.
• Date/time function.
• Heavy duty carrying case.
• Test leads: 31Inches/80cm.
• Software includes: 9 languages:
• English, French, Spanish, Germany, Italian,
• Portuguese, Japanese, Chinese (T/S).
• Application: 6V 12V batteries
12V 24V charging system
• Operating range: 40~2000CCA(SAE)
• Rating system: SAE, DIN, EN, IEC, JIS(battery type No.)
• Test discharged battery: Down to 1.5V
• Voltmeter: 1.5V ~ 30V
• Tolerance: CCA : <+/- 15%, +/-0.05V
• Resolution: 1 CCA

• Use with 1/2" Dr. tool or 21mm wrench.

Additional Information:

• Item Code: 4611
• Minimum Order Quantity: 1 Piece

• Made of steel for heavy duty operation.        
• Changeable jaws (straight, and bend), can be fixed stronger on the track.         
• Applicable: 12v engine, Diesel engine, and outstanding spring type engine.

Additional Information:

• Minimum Order Quantity: 1 Piece

• Special design for removing the bearing in narrow space.        
• Working depth: 93mm        
• Jaws thickness: 1.5mm        
• Applicable bearing dimension: Φ30~90mm

Additional Information:

• Minimum Order Quantity: 1 Piece

• Safety machine with no sparkles.
• The air bubbles can be added to boost the cleaning effect
and the mud inside the cooling pipe could be thoroughly removed.
• Double filters designed.
• Totally automatic machine to clean the system again and again by itself.
• Easy to find out the leakage from the liquid pressure or air pressure.
• Use with JTC-1409P cleaner and JTC-1402 universal adapter set to
achieve high efficiency.
• patented.
Why should to clean your Car A/C System ?
1.The compressor is wedged by something. There are some bits of aluminum and
dirt in the air condenser or system. When the tube of system becomes narrow,
A/C system can neither work smoothly nor blow cold enough.
The voice of compressor is getting loud and maybe cause the system to waste
more oil due to the overload

Car A/C Cycle System Model:

 

Cleaning Suggestion:
1.To dismantle points of a d e h to separate the model into
2 parts.--- one high-pressure side a b c d and the other low-
pressure side e f g h.
2.Firstly, clean low-pressure side e f g h, when A/C System
Flush Machine functions from e(connect with cleaning agent outlet)
to h (connect with cleaning agent collecting point).
Not only make circulation again and again, but also stop
function suddenly to let the cleaning agent be soaked in
the tube for a while.
When cleaning the low-pressure side, please note that the
air pressure needs to be limited between 2 ~ 3 kgs.
Because of the expansion valve will be closed if the air
pressure is too high .
------It also can be exchanged to connect tube of e and h
points to do the cleaning.
3.Then, clean high-pressure side a b c d, when A/C System
Flush Machine functions from a ( connect with cleaning agent
outlet ) to d ( connect with cleaning agent collecting point ).
Not only make circulation again and again, but also stop function
suddenly to let the cleaning agent be soaked in the tube for a while.
When cleaning the high-pressure side, the air pressure is not limited.
------It also can be exchanged to connect tube of a and d points
to do the cleaning.
***If the flow of cleaning agent is not smooth in any tube,
possibly have to dismantle some points to separate more parts.
***Different cars have different cleaning ways.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Enlarged 45mm oil filler hole for easier to refill oil.
• With oil dispensing gun to easily control the oil filling rate.
• With a dehumidify valve to filter the water from the air compressor.
• Compressed air could be stored in the tank and use for filling oil at any place.
• A clock or digital meter can be attached to measure the volume of the refilled oil. (optional part)
• Capacity: 25L

Economic type connector set are designing for car factory demand.
 You can use it nimble on the adjustment and assistant the technician
 checking the car problem rapidly and accurately.
 Contents: 1pc 5kΩ Potentiometer (Variable resister)

•  2pcs LED stroboscope
•  1pc Wire checking clips
•  6pcs Various automotive flat terminals
•  2pcs Probe
•  1pc SRS connector
•  2pcs Alligator clip
•  4pcs Acicular probe
•  4pcs 1 to 1 connector

Additional Information:

• Minimum Order Quantity: 1 Piece

• Quickly and easily remove O-ring or grease and oil seal.
• Special angle on the tool head provides a better work that
    the traditional seal pullers.
• 3 different lengths and tips fit nearly all applications.
• Simple insert the tool tips, press and pull.
• Length : 117/165/150 mm

Additional Information:

• Minimum Order Quantity: 1 Piece

• Capacity : 80L
• Same function as JTC-1031 plus extracting function; to absorb oil from car by air pressure effect.
• Tubes disposing same as JTC-1032

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• Made of chrome molybdenum.
• Heat treated.
• Quick Easy way to remove broken screws,pipes, bolts studs.
• Size: 7/64",9/64",5/32",1/4",19/64"

Product Details:

• Chrome vanadium steel• Contents:                  56121-15/16"~1/2"(9~12mm)                  56122-1/2"~5/8"(12~16mm)                  56123-5/8"~7/8"(16~22mm)                  56124-7/2"~11/8"(22~27mm)

Product Details:

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• 2 IN 1 wire stripper cutter.    
• Self-adjusting mechanism according to wire size without damaging the conductor.    
• Adjustable stop for consistency in wire strip lengths. Replaceable blade system.    
• Simple adjustment dial for blade pressure according to the thickness of insulation.    
• Applicable wire stripping range: 0.2~5mm 8mm width flat cable.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• The easy stripper cutters are made by precision machines and HRC55-60 blade cuts wire fast and smoothly.    
• Applicable: Stripper range: AWG 24-10 (0.2~6.0mm²)    
                       For insulated terminals: AWG 22-10 (0.5~6.0mm²)    
                       For non-insulated terminals: AWG 22-10 (0.5~6.0mm²)    
                       For auto ignition terminals: 7-8mm  

• Special design to remove and replace the battery terminal and alternator bearing.           
• One-touch push open jaw.  

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• Specially designed to provide a better way to prevent over crimping and a neat clean appearance.           
• It's essential tool for replacing or repairing battery cable terminal ends.           
• Applicable: Terminal soze from 6ga. To 4/0.

• To protect the wheel rims from damage.

• Total: 2pcs

Additional Information:

• Minimum Order Quantity: 1 Piece

• Made from forged medium carbon steel.           
• Size: 12", 16", 20", 24" 

Additional Information:

• Minimum Order Quantity: 1 Piece

• Contents: Tube cutter: 1/8" ~ 1-1/8"          
                    Flaring tool: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"          
• Another kit JTC-5632M with metric size size: 4, 6, 8, 10, 12, 14, 16mm.          

Additional Information:

• Minimum Order Quantity: 1 Piece

• Accurately flares and swages soft copper, aluminum and brass tubing.          
• Die holding bolck operates with 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8",3/4" outer diameter tubing          
• 5 spreaders swage 3/16",1/4",5/16",3/8",1/2",5/8",3/4" outer diameter tubing.          
• Tube cutter capacity 1/8" To 1 1/8

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

1/4" window scale adjustable torque wrenches

With pulling legs for narrow spaces in different lengths.• Particularly well suited to be hung up on workshop walls 
• All required clamping depths available at any time. 
• Size: Width: 130mm 
             Arms Height: 100, 200, 250mm/2pcs

Additional Information:

• Minimum Order Quantity: 1 Piece

• Use on any kind of plastic. Such as bumper, upholstery, fender, etc k• Power:AC110V / 220V, 50/60HZ• Size:W110 x D160 x H110mm• Contents:0.6mm nails x 100pcs                      0.8mm nails x 100pcs                      90 nails x 100pcs

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

•Product Code- PTSP21 •Brand- PRO TUL •Size- 21 mm •Length – 38 mm •Diameter- 27.5 mm •Deep marking for easy identification. •Knurling position is optimized for best finger gripping position. •Mirror Finish. •Smooth chrome finish is easy to clean, won't show prints and keeps rust away. •Its made with specially alloy steel. •It  is heat treated for extra strength. •List Price- 138/- •Taxes, packing forwarding charges as actual.

Product Details:

Multifunctional insulation pliers YT-2313 with a blackened surface that protects against corrosion.  Handles secured with two-component plastic caps.
Quick and automatic stripping mechanism for both flat and round cables in the range from 0.2 mm2 to 6.0 mm2
The ends of the working jaws are made of steel hardened to the level of HRC 52-57
Possibility of cutting wirescrimp connectors can be crimpedPossibility of crimping insulated connectors

SLIP JOINT PLIERS

Additional Information:

• Minimum Order Quantity: 1 Piece