HAND TOOL 1

???Welded boby and made from middle carbon steel.
???Capactity:1/4" to 3/4", available in metric sizes.

Additional Information:

• Minimum Order Quantity: 1 Piece

• Provides a fast and easy way to locate noises in engines or bearings and other moving parts.• Aluminum alloy probe/needle for finding the exact location of specific noises.• Instrument is shockproof.• Ideal for pinpointing unusual vibration or suspected leaks. (valves, piston ring, gaskets etc…)

Additional Information:

• Minimum Order Quantity: 1 Piece

•This heavy duty blade is designed with a chisel edge.•1-1/4" (32mm) wide blade.7-1/2" (190mm) OAL.
product code:- JTC 1501 

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

•Edge type: Straight•Material: STAINLESS steel•Total length: 190mm•Edge width: 20mm

• Works on all 12 volt gasoline engines.• High impact ABS housing.• Detachable heavy duty inductive pick-up clamps and leads for easy operation and replacement.
PRODUCT CODE:- JTC 1626 

Additional Information:

• Minimum Order Quantity: 1 Piece

Hook the brake return spring and screw-up to lock it for removal installation.• A smart tool to service those breaks that don`t use anchor pins.

PRODUCT CODE:- JTC 1709

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

•Designed to reach into confined area for removal of  valve seal.
•serrated tip for better grasp of valve seal  regardless of its configuration.

product code: jtc 1716

• Easily removes and replaces wheel weights, as well as cutting and crimping.

• Made of heat strengthened steel. Includeds comfortable vinyl handle grips.

• With self-open function spring on the handle for easier operation.
PRODUCT CODE:- JTC 1911 

Additional Information:

• Minimum Order Quantity: 1 Piece

• For splitting track-rod ends, anti-roll bar mountings, ball joints, etc.

product code:- jtc 1916

Additional Information:

• Minimum Order Quantity: 1 Piece

Two specialty pullers in one set including one flange type puller for removal of harmonic   balancers, timing gear other parts with two or three tapped holes. And a steering wheel,   pulley flywheel pull
product code:- JTC 1950 

Additional Information:

• Minimum Order Quantity: 1 Piece

• Heavy duty forged alloy steel yoke.• Remove tie rod ends and pitman assemblies from many light trucks.• Opening size: 33mm• Pull travel: 64mm
PRODUCT CODE:- JTC 1952

Additional Information:

• Minimum Order Quantity: 1 Piece

• Many kinds of windshields, back glasses and side glasses can be removed with the knife.• Quick and easy to use.

Additional Information:

• Minimum Order Quantity: 1 Piece

Use with #2520• Length:1" (25mm), optional for another length:1-1/2" (38mm)  JTC-2521

 

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Removes and saves all types of clips. • the front of the tools is tapered will fit easily under a clip, spread the jaws lightly so   they will go under and around the clip, then, close the jaws and the clip saver removers   the clip without damage to the clip. • gear for removing door panels.

product code: jtc 3004

Product Details:

• With release valve for easier operation.• Large handle with rubber for labor saving.• Special oval-shaped design on tank puller.• Capacity: 400 c.c.• Grease nipples outlet pressure: about 3200psi.

• Range: 3/32", 1/8", 5/32", 3/16"
• Jaws are made by alloy steel.
• Applicable to stainless, iron, aluminum rivet.
• Rubber covered could place a wrench to prevent it missing.

Additional Information:

• Minimum Order Quantity: 1 Piece

• Made from SNCM8660 material.• Long shank to reach confined areas or increase torque.• With double end tamper resist• Contents:T10H, 15H, 20H, 25H, 27H, 30H, 40H, 45H, 50H

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Backlit display: 2 lines 16 characters LCD.
• Thermal printer built inside.
• Printing paper width: 37mm.
• Test code function can Be added.
• Test leads : 31inch/80cm.
• Software includes: 7 languages:
• English, French, Spanish, Germany, Italian,
• Portuguese, Japanese.
• Application: 6V 12V batteries.
• Operating range: 40~2000CCA(SAE)
• Rating system: SAE, DIN, EN, IEC, JIS (Battery type No.)
• Test discharged batteries: Down to 1.5V
• Voltmeter: 1.5V ~ 30V
• Tolerance: CCA : <+/- 15%, +/-0.05V
• Resolution: 1 CCA

• 3/8" square drive
• prepared from chrome vanadium steel
• size: 24mm cadillac 36
27m/m mercedes: aclass
32m/m vauxhall/opel: astra, corsa, zatira
36m/m vauxhall/opel: omega dl 16v
Vectra,zafira>98
Bmw:16v
Ford:mondeo 2.0d 16v dura torq
Engine, transit 2.5 2.0 dura torq diesel engine
Mercedes:116mb engine vito cdi
38m/m vauxhall/vectra 2 liter diesel engin

Additional Information:

• Minimum Order Quantity: 1 Piece

• Made from forged medium carbon steel.           
• Size: 12", 16", 20", 24"

Additional Information:

• Minimum Order Quantity: 1 Piece

• L535 x W258 x H225mm (BOX)
• TOTAL 108PCS
• CONTENTS: B108-1, B108-2, B108-3, B108-4,B108-5

Additional Information:

• Minimum Order Quantity: 1 Set

• Drop forged CR-V steel jaws leaded screws (270mm) both heat treated ensure you obtain professional job performance.• The tool is designed for use in limited space under wheel arch.• Jaw design is fitting to warp coil claws for safely.• Maximum jaw opening is 270mm.

Additional Information:

• Minimum Order Quantity: 1 Piece

 Heat treated drop forged CR-V steel jaws leaded screws (270mm)

• The tool is designed for use in limited space under wheel arch.

• Special design claws to warp on coil spring safely.

• Maximum jaw opening is 270mm.

Additional Information:

• Minimum Order Quantity: 1 Piece

Fits in brake caliper to push back pistons for new brake pads installation.• Patented

Additional Information:

• Minimum Order Quantity: 1 Piece

• The fastest, easiest, most economical way to check electronic fuel injection signals.• Includes lights to check TBI systems on GM, Ford, and Geo; GM and Bosch PFI systems; and GM’s new SCPI (sequential central port injection) system.

Additional Information:

• Minimum Order Quantity: 1 Piece

• Dimension 35mm height and 600 mm length, convenient hanging hole and edge protector.• Use with feeler gauges to check for distortion in engine blocks, cylinder heads and flywheels.

Additional Information:

• Minimum Order Quantity: 1 Piece

• Fork type tool pulls CV joints with hidden retaining rings joints.• With this tool the axle assembly is popped out of trans axle without damage to transmission case or inside roller bearing.• Open Rate:63mm

Additional Information:

• Minimum Order Quantity: 1 Piece

• Economical-fast and easy, reduces labor costs.• Versatile-handles most standard and ABS brake systems.• Clean-collects old brake fluid without spillage.• Quiet-integrated silencer for a quieter working environment.• Silicon suction assembly with universal rubber fitting.• Capacity:2L• Working pressure:70-170 psi• Air connection:1/4"• Temperature range:-3?? F~140?? F• 12 sets / 15kgs / 16kgs / 6'

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• Make installing piston rings safe and easy without over-expanding the rings.• Works on most common piston diameter.• Capacity: 3/64” to 1/4” thickness.

• The special design offers easy access in confined spaces and eliminates the risk of damage to the wiper arms.• A simple, effective tool to remove stubborn wiper arms easily.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• Designed to protect soft-sided, sealed lifetime batteries.• Padded rubber and grooved for better grip of battery.• Vinyl handles for easy lift and carry.• Fits all 4" to 7" (102mm~178mm) batteries, including side post batteries.

product code: JTC 1922

Well designed tool removes upholstery clips in just a few seconds.• Place the tool under the edge of door panel insert in fastener then pry up.

PRODUCT CODE:- JTC 2511

Additional Information:

• Minimum Order Quantity: 1 Piece

Installs low-profile clamps used to hold CV boots on most FWD vehicles.Ratcheting action built-in cutter to tighten the clamp quickly and properly
product code:- JTC 1503

Additional Information:

• Minimum Order Quantity: 1 Piece

• Special designed for locking flywheel when dismanting or reassembling flywheels, clutch pressure plates and belt pulley.
• Length: 250mm

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Product Details:

Additional Information:

• Minimum Order Quantity: 1 Piece

JTC FLEXIBLE METAL FUNNEL

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details: